PPR管材生产线
PPR Pipe Production Line
技术参数
Main technical Parameters
Single screw extruder | Sizing mill | 喷淋机 | Draw machine, Cutting machine |
Model：SJ-65×33 | Length of sizing mill mm：6000 | Length of Spraying machine mm:6000 | Drive power:2.2 |
Screw diameter:：φ65 | Power of water pump kw:：3.7 | Power of water pump kw:2.2 | Max. draft load N::1000 |
Slenderness ration:： 33：1 | Power of vacuum pump kw:2.2 |
| Draft effective length mm:1500 |
Rotational speed of s crew r/min：1-105 | Power of vertical movement motor kw:0.55 |
| power of cutting motor kw:2.2 |
Main motor power kw：67 |
|
| Saw blade diameter mm:φ350 |
|
|
| Working pressure
Mpa:0.4-0.7 |
Unit | Item | PPR63 | PPR110 |
Extruder | Model | SJ-65 | SJ-90 |
Outline dimension(L×W×H) | 2800×1100×1800 | 4000×1200×1900 |
Capacity(kg/h) | 80-200 | 200-350 |
Pipe range(mm) | Φ16-63 | Φ50-Φ110 |
Gross power(KW) | 90 | 160 |
Sizing case | Outline dimension(L×W×H) | 6400×700×1350 | 6400×960×1450 |
Gross power(KW) | 8 | 11.5 |
Machine | Outline dimension(L×W×H) | 6400×600×1350 | 6400×900×1450 |
Gross power(KW) | 2.2 | 3.7 |
Drawing&
Cutting machine | Outline dimension(L×W×H) | 4100×920×1350 | 4700×1150×1700 |
Drawing speed(m/min) | 0.1-12 | 0.1-5.2 |
Drawing force(N) | 15000 | 20000 |
Gross powerKW) | 5.2 | 6 |
Pipe length(m) | 6 | 6 |
该生产线用于生产PP-R树脂管材，同时也用于生产PPB、PPC、PE树脂管材。
1、 槽式进料筒和阻挡螺杆的设计旨在增强塑性，并保证足够的挤出和低温均匀的熔体。
2、 过滤模用于防止材料过度切割，从而导致降解。在世界先进生产线的倡导下，“低温低压”挤压将成为现实。
This line is used to produce pipes of PP-R resin, meanwhile also used to produce pipes of PPB, PPC and PE resin.
1、Grooved feeding barrel and barrier screw are designed to enhance plasticity, and to guarantee adequate extrusion and melt of low and homogeneous temperature.
2、 Filtration die is used to prevent the material from excessive cutting, which may result in degradation. Advocated by advanced production lines worldwide, extrusion under “low temperature and low pressure” shall come truth.
